MANUALE PREPARATORE A DENTI CA - CB - CC
Old Cod.Q00A00155
New Cod. MANT2010/00751 R.0
INSTALLATION
- 17
Copyright ©2009 della Alpego spa ® -Tutti i diritti sono riservati. È espressamente vietata la ristampa o l’uso non autorizzato per iscritto da parte di Alpego spa
4.4. HITCHING OF THE TRAILED MACHINE
Proceed as shown in the picture to hitch up the drawbar:
1. Remove the stop pins A and the washers B
2. Insert the pivoting attachments D
3. Insert the washers B and secure with the stop pins A
4. Attach the drawbar to the lower lift arms
4.4.1. HYDRAULIC HITCHING OF THE REAR TRAILER
The Cayman CC are equipped with a rear, hydraulically operated transport trailer. Make sure that the pins, the quick hitches to
the tractor (if any), as well as the safety pins are in good working order and correctly inserted in their proper seats. Connect now
the two quick coupling joints with two sockets of the tractor (a pressure of 160/190 bars is necessary). Keep the hoses from the
cylinders to the tractor straight and away from moving parts.
The hydraulic pipes must be kept far from any moving component.
Every time you use the machine, check the pipes and the fixing devices of the pipe fittings for their
conditions. The repairs must be carried on only by qualified personnel using only ALPEGO original spare
parts.
COMPONENTS
A. Hydraulic cylinders
B. Safety valves
C. Quick coupling joint ½” lifting of the wheels
D. Quick coupling joint ½” folding of the wheels
HYDRAULIC DIAGRAM
4.5. HYDRAULIC HITCHING OF THE FOLDABLE MACHINE
The Cayman CB / CC
is a machine with double effect hydraulic installation to limit the overall transport dimension.
Make sure that the pin link, the eventual quick couplings of the tractor as well as the safety brakes are in good working order and
in their proper seats.
Now connect the two quick couplings of the hydraulic circuit to two clamps of the tractor(it is necessary a pressure of 160÷190
bar). Follow the direct lines from the cylinders to the tractor.
At this point the implement is still laying on the ground, connected to the tractor, with the 3-point linkages and the hydraulic
connections coupled, Make sure that no other person is close to the implement; from the tractor it is possible to act on the
lifting device and lift the equipment for ~50 cm. from the ground.
