MANUALE PREPARATORE A DENTI CA - CB - CC
Old Cod.Q00A00155
New Cod. MANT2010/00751 R.0
SAFETY RULES
- 9
Copyright ©2009 della Alpego spa ® -Tutti i diritti sono riservati. È espressamente vietata la ristampa o l’uso non autorizzato per iscritto da parte di Alpego spa
•
In contrary case the components of the same machine would provoke strong sollicitations on all who could compromise of
their integrity.
•
Not use the machine inside of structures sluices than there is noto ne adapted ventilaton.
3.2. MANTENANCE IN SAFETY
•
Do not allow unauthorized persons to perform maintenance operations or any other kind of intervention on the machine.
•
Maintenance and repairing operations must be carrie on in workshop fit for those purposes.
•
In case of maintenance of the machine disconnect hydraulic the tube from plug of the tractor.
•
Always use original accessories and spare parts in order to comply with the requirements of the manufacturer, otherwise, any
guarantee may be declined and some malfuctionings maya rise impairing the safety of the machine.
•
Respect the conformity of oils advises to you.
•
In performing any operation on the machine, disconnect the power takeoff of the tractor, activate the parking brake, remove
the start-up key and do not allow any person to get onto the tractor.
•
Before cleaning or greasing the cardan shaft disconnect the power takeoff, switch off the engine, activate the parking brake
and remove the start-up key.
3.3. TRANSPORT ON PUBLIC ROADS
If necessary, the machine can be transported on the roads while hitched to the tractor. The operator must check, compare and
adapt the implement so that it fully complies with the Highway Code in force in the country of use.
Bear in mind the following recommendations:
1.
Comply with the instructions in this manual when you hitch the machine to the tractor;
2.
The machine must remain blocked and raised from the ground during transport.
3.
You must take all possible precautions and comply with the pertinent laws in order to safeguard yourselves
and others.
4.
Projecting parts and those beyond the width of the tractor must be fitted with the relative protections.
5.
Projecting parts and those beyond the width of the tractor must be fitted with the relative protections.
6.
Warning boards to indicate the projecting parts of the implement must be affixed where necessary.
7.
The braking distance and steering capacity of the tractor are influenced by the weight of the machine hitched
to its power
lift. When driving round bends, take great care and allow for the action of the centrifugal force that shifts the
machine’s
center of gravity.
8.
Machines connected to a tractor can influence your driving behaviour, as well as the steering and braking power
of the
tractor, in particular in the case of single axle machines with the drawbar load on the tractor.
9.
The trailed version can not drive in public roads. Registration pending. WARNING: Max. transport speed 10 /15 Km/h
3.4. CLOTHES
Always wear safety gear and clothes. Make sure no dangling parts are present as they
may get caught in moving parts.
For the same reasons please always remove watches, rings, necklaces, wristbands etc.
Long hair may be a danger as well,
please keep them tied.
If it is Always wear safety gear as required by your local authorities
3.5. ECOLOGY
Comply with the regulations of your own country concerning the use and the disposal of the products which are used for
lubricating, maintaining and cleaning the machine ; strictly comply with the instructions listed in the packages of the products.
Comply with the laws in force also in case the machine is scraped.
