9
23. Measure Height
for LONG BACK
REST
Measure the desired
position at which you
will later install the
Back Rest above the
Upper Bench.
(Suggested: 8
-
12”
above the bench and
centered on the wall.)
25. Attach LONG BACK
REST
Use 2” screws and pre
-
drilled holes to attach the
Long Back Rest to Wall
Sections B and C.
24. Drill Hole for LIGHT
CORD
The LED lighting comes in-
stalled on the back of the Back
Rest. Find the cord coming
from the light switch and drill
a small hole in Wall Section C
to insert the Light Cord
through so it comes through to
the outside of the sauna.
26. Mount POWER SUPPLY
Use provided screws to position
Power Supply where it is most con-
venient for you on the outside of
Wall Section C.
Optional: Secure excess wire with
zip tie or some other fastener as de-
sired.
27. Connect to POWER SUPPLY
Plug the Cord into the Power Supply. Plug the Power Supply into
any wall outlet, and flip the switch mounted on the back of the
bench to operate the LED light.
Cord from LED light
Power
Supply
