6
Install filler strip to Window Section F
12. Position WINDOW SECTION G
Position Window Section G on the left front side
of the sauna according to the guide on ILLUS-
TRATION 1.
NOTE:
Window Section G will not attach to Wall
Section A.
Position Window Section G
13. Position DOOR SECTION H
Position Door Section H on the front left side of
the sauna according to the guide on ILLUSTRA-
TION 1. Using 2” screws and pre
-
drilled holes,
fasten Door Section H to Window Section G.
NOTE:
Window Section H will not attach to the
filler strip previously attached to Window Section
F.
Position Door Section H
14. Attach WALL CONNECTOR
Find the pre
-
drilled wall connector. Place the
wall connector on the top of the front wall edge,
bridging Door Section H, the filler strip, and Win-
dow Section F. Screw it into place with 2”
screws.
Attach wall connector
11. Install FILLER STRIP
Screw the filler strip to Window Section F to fill
the gap between Window Sections F and Door
Section H. Trim pieces will later be installed over
this joint.
NOTE:
Due to the inherent variations in lumber
dimensions, this gap may not be completely filled
by the filler piece. This will be addressed later:
provided trim pieces will cover any remaining
openings.
H
