8
20. Attach UPPER BENCH
Using 2” screws, attach the Upper Bench to the
Bench Supports using the pre
-
drilled holes in the
Upper Bench.
NOTE:
The Upper Bench is slightly wider than
the Lower Bench.
Attach Upper Bench
21. Attach LOWER BENCH
Using 2” screws, attach the Lower Bench to the
Lower Bench Supports using the pre
-
drilled holes
in the Lower Bench.
NOTE:
The Lower Bench will overlap two wall
sections on each side of the sauna.
Attach Lower Bench
Attach Roof Trim pieces
19. Attach TRIM
Find the package of 4 Roof Trim pieces and attach
to the raw edge of the Roof Sections with finish
nails. Find the package of 2 Wall Trim pieces and
attach over the filler strip between sections F & H.
NOTE: The trim pieces are not pre
-
drilled. You
may install using finish nails.
22. Attach VENT COVER
Screw the Vent Cover over the vents on Wall
Section B using the pre
-
drilled hole.
NOTE:
Tighten only enough so vent cover
will turn freely over vents.
