TROUBLESHOOTING GUIDE
22
Problem
Probable Cause
Solution
Motor stops suddenly
1. Extension cord is too long
or wire size too small.
2. Motor thermal switch has
tripped due to overheating
and overwork.
1. Remove extension cord or
use proper extension cord
(See instructions).
2. Make sure main supply
voltage corresponds to
specifications. Allow to
cool and restart unit.
Unit will not stop when
trigger is released
1. Gun/Hose Assembly is
defective.
1. Remove Wand from the
Gun and squeeze trigger
to ensure that the water
is coming out of the front
of the Gun at a rate equal
to the Garden Hose. Call
Customer Service:
1-800-423-3598.
Unit begins to smoke
1. Overheated, overloaded or
damaged motor.
1. Turn off unit and Call
Customer Service:
1-800-423-3598.
Trigger will not move
1. Gun Safety Lock in
engaged.
1. Release Safety Lock (See
instructions).
Gun/Hose - Leaking water
1. Loose fitting.
1. Tighten fittings. If persists,
Gun/Hose will need to be
replaced.
Call Customer Service:
1-800-423-3598.
Pump is noisy
1. Pump is sucking air.
1. Make sure hoses and
fittings are air tight. Turn
off machine and purge
pump by squeezing trigger
gun until a steady flow of
water emerges through
the nozzle.
