Alltech 30L100, Operator'S Manual

Page: 72 / 77

KEENAN MechFiber300 Operator’s Manual
72
Revision F01 06
th
March 2020
17: Blockage at top knife On non-Bale handler models, load smaller sections
of material into machine
On Bale handler models check tine height settings
Ensure all feed materials are free from foreign
objects before loading into machine
In the unlikely event of a large blockage occurring
which prevents the machine from restarting using
the tractor, it may be necessary to enter the mixing
chamber to manually clear the blockage. Please
refer to Section 5
– Safety, in particular point “u”
18: Blockage at auger Use VFC-Door to meter material intake into auger
Refer to Section 7.9
– Feeding Out for correct
operation of VFC-Door
In the unlikely event of a large blockage occurring
which prevents the machine from restarting using
the tractor, it may be necessary to enter the mixing
chamber to manually clear the blockage. Please
refer to Section 5
– Safety, in particular points “u”
19: Blockage at Rear Feed-out Use VFC-Door to meter material intake into auger
conveyor Refer to Section 7.9
– Feeding Out for correct
operation of VFC-Door
Ensure the conveyor belt rotates as VFC is opened
Check setting of priority flow valve (if fitted)
In the unlikely event of a large blockage occurring
which prevents the machine from restarting using
the tractor, it may be necessary to enter the mixing
chamber or gain access to the discharge auger
chamber to manually clear the blockage. Please
refer to Section 5
– Safety, in particular point “u”