Alltech 30L100, Operator'S Manual

Page: 62 / 77

KEENAN MechFiber300 Operator’s Manual
62
Revision F01 06
th
March 2020
11.15 Bale handler parts
Series I Bale handler
Table 25: Series I Bale handler
Item: P/N: Qty: Description:
1 FP160-045-0083 1 Bale Handler Creel Curved Plate assembly
2 FP280-045-017 2 Bale Handler Creel Guide Arm
3 FP160-045-0088 1 Creel End Cover Plate
4 FP160-045-0003 1 Bale Handler End Creel assembly (rear)
5 700733 2 M20 washer
6 700305 2 M20 locknut
7 FP140-045-0096 9 Bale Handler Tine Bracket
8 FP140-045-0111 9 M24 x 150mm bolt with grease nipple (701127) fitted
9 700318 9 M24 locknut
10 700316 9 M24 washer
11 FP140-045-0113 9 Tine Arm assembly
12 FP140-045-0004 1 Retainer Strip, 5 mm, for rubber apron, 675 mm long
13 FP140-045-0003 1 Rubber Apron
14 FP200-045-0004 1 Retainer Strip, 5 mm, for rubber apron, 1,725 mm long
15 FP140-045-0005 1 Apron Rail and Stud assembly
16 700729 13 M10 washer
17 700241 13 M10 locknut
18 FP280-045-010 2 Bale Handler nylon guide wheel
19 704040 2 End Creel Ram assembly
20 FP160-045-0002 1 Bale Handler End Creel assembly (front)
21 700283 2 M16 locknut
22 700732 2 M16 washer