Alltech 30L100, Operator'S Manual

Page: 64 / 77

KEENAN MechFiber300 Operator’s Manual
64
Revision F01 06
th
March 2020
Table 26: Series III Bale handler
Item: P/N: Qty: Description:
16 FP140-045-0019 36 Spacer plate, 3 mm, for Bale Handler Bracket
17 700247 20 M12 x 30 mm set screw
18 700730 11 M12 flat washer
19 700266 11 M12 locknut
20 700732 23 M16 flat washer
21 700283 15 M16 locknut
22 700739 8 M16 spring washer
23 700275 8 M16 x 50 mm bolt
24 FP140-045-0111 9 M24 x 150 mm bolt with grease nipple (701127) Fitted
25 700729 13 M10 flat washer
26 700241 13 M10 locknut
27 700281 4 M16 x 90 mm bolt
28 FP140-045-0115 3 Bale Handler Tine assembly (extra drop) M24 bolt
29 FP160-045-0094 2 Bale Handler Kicker Arm mounting bracket (weld on)
30 FP280-045-017 2 Bale Handler Creel Guide Arm
31 FP160-045-0088 1 Creel End cover plate
32 FP160-045-0003 1 Bale Handler End Creel assembly (rear)
33 700733 2 M20 washer
34 FP160-045-0002 1 Bale Handler End Creel assembly (front)
35 704040 2 End Creel Ram assembly
36 701112 2 R clip
37 700746 2 M25 flat washer
38 FP280-045-010 2 Bale Handler nylon guide wheel
39 700269 2 M16 x 110 mm bolt
40 700228 13 M10 x 35 mm bolt
41 FP160-045-0075 1 Kicker assembly, Rubber Mount assembly
42 700247 6 M12 x 30 mm bolt
43 700266 6 M12 locknut
44 700730 6 M12 washer
45 700732 2 M16 washer
46 700283 2 M16 locknut
47 700732 9 M16 washer
48 700283 9 M16 locknut
50 FP140-045-0003 1 Rubber Apron
51 FP160-050-0003 1 Load Bumper Rubber