background image

3. The maintenance of instrument

The rotor should be cleaned by the cloth stained with a little alcohol. If there are
smutches on the instrument, clean them by soft cloth stained with cleaning cream.

4. After Service

a)

Warranty Content

Regard to the fault caused by material and manufacture, within one month from the

date of delivery. The manufacture is responsible for change the new instrument.

Regard to the fault caused by material and manufacture, within 12 months from the

date of delivery. The manufacture is responsible for change or repair at its option.

Repair products must ship to specified maintenance department by purchaser and

freight charge need to be paid by purchaser. Freight charge for sending back to
purchaser will be paid by manufacturer.

Regard to the maintenance out of warranty period, manufacture will charge the

maintenance cost accordingly.

b)

Warranty Scope

Above-mentioned warranty is not applicable for inappropriate maintain, improper

use and operating under improper condition, also is not applicable for the damage
which caused by repair and refit without authorization.

The instrument should be put in the place of low temperature, little dust,
no water and no sun or strong lamp. What’s more, the place should be
good aeration, no corrosively gas or strong disturbing magnetic field, far
away from central heating, camp stove and other hot resource. Don't put
the instrument in wet and dusty place. The vent on the instrument is
designed for aeration. Don’t wall up or cover the vent in order to keep
from high temperature. If you use more than one instrument the same
time, the distance between them should be more than 100cm.

Power off when you finish your work. Pull off the connector plug when
there’s long time no use of the Instrument and cover it with a cloth or
plastic paper to prevent from dust.

Pull the connector plug from the socket at once in the following cases, and
contact the vendor:

There is some liquid flowing into the instrument;

Drenched or fire burned.

Abnormal operation: such as abnormal sound or smell.

Instrument dropping or outer shell damaged.

The function has obviously changed.

DOMINIQUE 

DUTSCHER 

SAS

Summary of Contents for SealBio-2

















Reviews: