![background image](http://html1.mh-extra.com/html/allo-com/prigw100/prigw100_user-manual_2903738011.webp)
ALLO PRI Gateway
User Manual V2.0
11
PRI Gateway Front Panel LED Indicators:
2.2. Accessing the WEB GUI
PRI Gateway WEB GUI can be accessed either through WAN or Management Console.
Steps to Access the GUI during the initial setup through Management Interface (LAN):
Step 1: Make the setup as described in Hardware setup section, Lets access the WebGUI
through Management Interface (LAN)
Step 2: Change the Network setting of the PC in manual mode (i.e. Static IP mode). Assign the
IP address to the PC in the range of 192.168.113.xxx (E.g:192.168.113.10), net mask as
255.255.255.0 and gateway & DNS as 192.168.113.1.
Step 3: Launch the web browser and enter the URL http://192.168.113.2 (Default LAN IP
address) to open the login page of PRI Gateway’s Graphical Interface.
Step 4: Login using the default username & password (Default: Username: admin; Password:
admin). Successful login takes you to the Dashboard page. Observe the WAN IP address on
the dashboard, this will be used to access the GUI from the WAN interface.
Note:
Recommended web browser to access GUI is Mozilla Firefox.
Step 5: If your network is not enabled with DHCP server, configure the WAN port IP address
manually in the
SETTINGS > Network Settings
section as per your requirement.