![background image](http://html1.mh-extra.com/html/allo-com/prigw100/prigw100_user-manual_2903738023.webp)
ALLO PRI Gateway
User Manual V2.0
23
Signaling:
By Default its PRI-CPE. In the scenarios like if you want do PRI trunk with other
PBX’s then you need to select as PRI-NET.
Switch Type:
Select the switch type as indicated by the ISDN service provider
By default: E1- Euro ISDN & T1- National ISDN2
Sync/Clock Source:
By default it’s Master
Line Build Out:
LBO depends on the line length for which attenuation is defined. By default it is
0db. Check with your service provider for appropriate Line build out settings if you face any
issue.
Click on
“SAVE “
button, followed by “
SAVE ALL
” button to update the configuration changes.