Allied Construction Products, LLC www.alliedcp.com
TM576981_HP700B_18feb
iv
Safety Information – [cont’d]
Safety, Identification and Information Labels
Information labels affixed to the Allied equipment
include safety warnings, identification and
instructions important to operation and service.
Keep all safety labels clean. Words and illustrations
must be legible. Before operating this equipment,
replace damaged or missing labels. Refer to the parts
section for ordering information. Refer to Figure “S-3”
for their location on the equipment.
Table S.1 Labels
Fig
Label
Description
L1
Read the Manual
- Decal indicates that it is important to read the
manual for detailed explanations and instructions
L2
Stay Clear -
Decal alerts personnel and by-standers to maintain a safe
distance from the Allied work tool during operation.
L3
Hot Surface
- Decal identifies components of the Allied work tool that
may become hot during operation.
L4
Lift Point-
Decal identifies approved lift points of the Allied work tool.
L5
Pressure Line Marker
– A red colored cable tie marked “PRESSURE
IN” is attached to the SUPPLY hose of the Allied work tool for ease of
identification between hoses.
L6
ALLIED Logo
– This decal is the Allied brand identifier and is a
registered trademark of Allied Construction Products, LLC.
L7
HO-PAC
®
Product Identification
– HO-PAC is a registered trademark of Allied
Construction Products, LLC used for identifying the hydraulic vibratory
plate compactor / driver.
L8
700B
Model Identification
- Decal indicates the model of the Allied work tool.
L9
Made in USA
L10
Equipment Identification
- Manufacturer’s Name and Address, Product
Name, CE compliance marking, Model Number, Serial Number, Year of
Manufacture, and Mass