17
Symptom
Probable Cause
Remedy
Nothing works
•
Hydraulic valve not engaged
•
One or more quick couplers
not completely engaged
•
Incorrect flow direction
•
Defective quick coupler
•
Hydraulic pump low on fluid
•
Engage to full detent
•
Fully engage all couplers
•
Switch flow direction using
controls or swapping hose
ends
•
Replace defective quick
couplers
•
Top up fluid level
Fan turns too slow
•
Inadequate hydraulic flow
for snowblower
•
Check the gpm of your
system, ensure auxilliary
pumps is engaged on power
unit for high flow models
Fan and auger work but chute
controls do not work properly
•
Electrical connections to
battery
•
Fuse blown
•
Connector from switches to
harness not connecting
•
Air in hydraulic system
•
Insufficient hydraulic power
•
Ensure that the clamps are
making proper connection
•
Replace fuse
•
Ensure the connector is fully
engaged. Check for broken
wires.
•
Check fluid level of power
unit, purge air
•
Check specifications and
flow setting
Chute rotation seems to lack
power to turn.
•
Broken/disconnected chain
•
Debris/ice caught in chain
•
Chute retainer hardware too
tight
•
Check chain condition
•
Clear chute and chain of
obstructions
•
Loosen hardware so that
chute can be turned by hand
with chain disconnected
Fan stops/slows when raising
or turning skid steer
•
Insufficient hydraulic power
•
Check that operating at full
engine RPM
•
Check flow rate and PSI w/
requirements
Skid steer unable to lift
snowblower
•
Size mismatch of
snowblower vs. skid steer
•
Match lifting capacity of
skid steer with weight of
snowblower plus snow load
Chute controls operate
backwards
•
Control box mounted in
wrong orientation
•
Wiring connected
improperly on valve
manifold
•
Mount in appropriate
orientation (if not possible,
connections may be
swapped underneath
manifold cover
One control switch operates
two different chute functions
•
Wires connected improperly
on valve manifold
•
Connect wires in proper
arrangement
Troubleshooting
Troubleshooting - Hydraulic Snowblower
Summary of Contents for 6025
