background image

6

Safety - Hydraulic Snowblower

General Safety Instructions

• 

Have a first-aid kit available for use and know how to use it. 

• 

Have a fire extinguisher available, stored in a highly visible location, and know how to use it.

• 

Wear appropriate protective gear. This list may include but is not limited to:

 

- hard hat

 

- protective shoes with slip resistant soles

 

- protective glasses or goggles

 

- heavy gloves

 

- wet weather gear

 

- hearing protection

 

- respirator or filter mask

• 

Read and understand the Operator’s Manual and all safety signs before operating, servicing, 
adjusting, repairing, or unplugging the equipment. 

• 

Do not attempt any unauthorized modifications to your Allied by Farm King product as this 
could affect function or safety, and could affect the life of the equipment. 

• 

Never start or operate the snowblower except from the operator’s station on the power unit.

• 

Inspect and clean the working area before operating.

• 

Keep hands, feet, clothing, and hair away from moving parts. 

• 

Ensure bystanders are clear of the area before operating.

Start-Up Safety

• 

Do not let inexperienced operators or children run this equipment.

• 

Place all tractor and machine controls in neutral before starting.

• 

Operate only with ROPS and seatbelt equipped tractors.

• 

Do not operate inside a building unless there is adequate ventilation.

• 

Ensure all shields are in place and in good condition before operating. 

Operation Safety

• 

Do not permit riders.

• 

Do not wear loose fitting clothing during operation.

• 

Do not allow anyone other than the operator close to the auger when in operation.

• 

Stay clear of snowblower augers.

• 

Stay clear of snowblower discharge chute. Rocks or debris can be picked up and thrown.

• 

Never operate equipment in the raised position. 

Summary of Contents for 6025









































Reviews: