Allied 6025, Operator And Parts Manual

Page: 4 / 40

4
Introduction - Hydraulic Snowblower
Introduction
For more than a generation, Allied has been building the most popular snowblowers used on
farms, airports, and municipalities throughout the North American snow-belt. Now, all that
experience brings you the rugged hydraulic snowblowers to handle more demanding snow
clearing jobs.
The Allied Hydraulic Snowblower is offered in three main sizes: 60", 72" and 84". The 72" and 84"
sizes are also made available in a higher capacity version for use on equipment with high flow
hydraulic systems. These models are best suited for the more demanding snow clearing jobs with
their increased cutting height, larger diameter auger and fan, and increased throwing capacity. As
an option, standard flow (SF) and high flow (HF) width extension kits are offered to increase the
cutting width of any model by 6" (15.2 cm).
The rugged design of the Allied Hydraulic Snowblower is meant to provide many years of
trouble-free operation. The direct drive auger and fan means there are no drive chains, U-joints,
or driveshafts in key areas that need lubrication, adjusting, or replacing. The cutting edge and
skid shoes provide for simple bolt on replacements. The hydraulic system is designed for efficient
operation without requiring any adjustments, provided that a 20.7 GPM flow rate is supplied at
3300 psi for SF models, and a 37 GPM flow rate is supplied at 3300 psi for HF models. The remote
in-cab control with supplied wiring harness allows the operator to conveniently control the snow
discharge path during operation.
Keep this manual handy for frequent reference. All new operators or owners must review the
manual before using the equipment and at least annually thereafter. Contact your Allied Dealer
if you need assistance, information, or additional copies of the manual. Visit our website at
www.farm-king.com for a complete list of dealers in your area.
The directions left, right, front and rear, as mentioned throughout this manual, are as seen facing
in the direction of travel of the implement.