Camera interfaces
Page 62
Prosilica GB Technical Manual V2.2.6
Camera I/O non-isolated user circuit example
The non-isolated trigger circuit is connected to a Texas Instruments SN74LVC2G241
buffer or driver inside the camera. See the Texas Instruments SN74LVC2G241 for
more detailed information.
Figure 25: Prosilica GB non-isolated trigger user circuit
Input: Incoming trigger must be able to source 10 µA, at 3.3 Volts. Input trigger
voltage greater than 5.5 Volts will damage the camera.
Output: The maximum sync output current is 24 mA, at 3.3 Volts.
Cable Side
In 2 (3.3 V Driver)
Camera GND
3M 10114-3000PE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Out 2 (3.3 V Receiver)
Camera Power
