Compliance and intended use
Page 14
Prosilica GB Technical Manual V2.2.6
•
The camera is a component, it is neither a complete product, nor is it a
ready-made technical solution.
•
The camera-supporting software can be obtained and installed separately from
the camera. Usage of the software is solely the responsibility of the user.
•
The camera must not be opened. For all repair tasks, contact Allied Vision or
one of Allied Vision's authorized representatives.
•
Observe the intended use. The camera must only be used for purposes that are
in conformity with the stated intended use.
•
Additionally, refer to the warranty information on the Allied Vision website.
•
For usage in product with specific safety requirements a Quality Assurance
Agreement with Allied Vision is required.
•
The camera is intended for use in a commercial, industrial, or business
environment. The test phase and programming should be carried out by
advanced users.
Use in medical devices
The camera provides basic adequacy to be used in medical devices as well,
however, is not specially designated for operation in medical devices. When used
as part of a medical device, a review of the specific application is necessary. For
usage in medical product, a Quality Assurance Agreement with Allied Vision is
required. Users who integrate the camera into an application must comply with the
rules and regulations concerning medical devices.
Copyright and trademarks
All text, pictures, and graphics are protected by copyright and other laws
protecting intellectual property. All content is subject to change without notice.
All trademarks, logos, and brands cited in this document are property and/or
copyright material of their respective owners. Use of these trademarks, logos, and
brands does not imply endorsement.
Copyright © 2019 Allied Vision GmbH. All rights reserved.
