Manta Technical Manual V7.0.3
15
Introduction
continued from last page
V7.0.1
2013-Sep-30 Added
Changed maximum frame rates and gain range, added burst mode for Manta
G-223, G-419, see
Resolution and ROI frame rates
Added a feature of Manta type B cameras (G-223 / 282 / 283 / 419 / 609 /
917): temperature monitoring, see chapter
Added ReverseX feature in chapter
Added
Manta angled-head housings (type B)
on page 100
Updated maximum gain values for
Updated minimum exposure time for
Updated the frame rate vs. height graphs in chapter
Updated links to the AVT GigE installation manual through out the manual
V7.0.2
2014-May-08 •
Updated chapter
•
Updated drawings for
Manta type A board level (non-PoE): dimensions
and
Manta type A board level (PoE): dimensions
•
Updated spectral sensitivity plots in
•
Updated the note on
StreamHoldCapacity
and
•
Added section
Exceptions for non-PoE Manta cameras up to serial
•
Updated available color pixel formats for
and
•
Updated optional accessories in the
chapter
•
Added section
Manta standard board level variants (type B)
•
Added Hirose cable information on page 87
•
Updated exposure time values for
•
Corrected frame rate formula for Manta G-145B NIR on page 123
V7.0.3
2014-Jun-09 •
Added trigger latency and jitter values in the
•
chapter
•
Added
section on page 59
•
Preliminary Manta type B angled-head and boardlevel variant informa-
tion removed from the document until samples are available
Version
Date
Remarks
Table 1: Document history