Manta Technical Manual V7.0.3
49
Specifications
Manta G-283B/C
Feature
Specification
Resolution
1936 x 1458
Sensor
SONY IT CCD ICX674ALG/AQG with EXview HAD II microlens
Type
CCD Progressive
Sensor size
Type 2/3
Cell size
4.54 μm
Lens mount
C-Mount
Max frame rate at full resolution 30 fps
Max image bit depth
12 bit
On-board FIFO
128 MByte, up to 47 frames at full resolution, Mono8/Bayer8, and a
GevSCPSPacketSize
= 8192 bytes per packet
Mono formats
Mono8, Mono12Packed, Mono12
Color formats
BayerRG8, BayerRG12Packed, BayerRG12, Mono8, RGB8Packed,
YUV411Packed, YUV422Packed, YUV444Packed, BGR8Packed
Exposure control
41 μs to 38 s; 1 μs increments
Gain control
0–33
dB
Binning
Horizontal
: 1 to 8 pixels;
Vertical
: 1 to 14 rows
Decimation
2 out of 4, 2 out of 8, 2 out of 16 (horizontal & vertical)
Opto-coupled I/Os
2 input, 2 outputs
RS-232
1 TxD, 1 RxD
Voltage requirements
8–30 VDC, or PoE
Power consumption
3.7 W @ 12 VDC, 4.3 W PoE
Trigger latency*
Idle state
: 6.5 μs
Frame valid state
: 17.7 μs
Trigger jitter*
Idle state
: 4.8 μs
Frame valid state
: 15.9 μs
Operating temperature
+5°C to +45°C ambient temperature (without condensation)
Storage temperature
-10°C to +70°C ambient temperature (without condensation)
Body dimensions (L x W x H)
86.4 mm x 44 mm x 29
mm including connectors, w/o tripod and lens
Mass
150 g (without lens)
Hardware interface standard
PoE, IEEE 802.3af 1000BASE-T, 100BASE-TX
Software interface standard
GigE Vision Standard 1.2
Camera control interface
GenICam V1.0 compliant
Regulatory
CE, FCC Class B, RoHS (2011/65/EU)
*It is possible to start the exposure of the next frame while the previous frame is read out:
–
Idle state
: sensor is ready and camera is idle, waiting for the next trigger
–
Frame valid state
: sensor is reading out and camera is busy. If the Next frame is requested by an
external trigger in this state, higher latency may occur as compared to the Idle state
Table 15: Manta G-283B/C camera specifications
