Manta Technical Manual V7.0.3
24
Specifications
Specifications
Manta G-031B/C
Caution
Before operating any AVT camera, read the
safety instructions
and
ESD warnings
in the
AVT GigE Installation Manual.
http://www.alliedvisiontec.com/emea/support/downloads/
product-literature/manta.html
Note
PoE capable cameras
How can I distinguish between PoE capable cameras and
cameras that are not PoE capable?
PoE capable cameras have the letters
PoE
written on the
camera’s label on the bottom side of the camera.
Note
All measurements were done without protection glass / with-
out filter.
The uncertainty in measurement of the QE values is
10%.
This is due to:
•
Manufacturing tolerance of the sensor
•
Uncertainties in the measuring apparatus itself (Ulbricht
sphere, optometer, etc.)
The measurements for Manta G-145B NIR in figure 21 and
figure 22 were done with a different method to illustrate the
effect of the NIR mode.
Feature
Specification
Resolution
656 x 492
Sensor
SONY IT CCD ICX618AL/AQ with EXview HAD CCD II microlens
Type
CCD Progressive
Sensor size
Type 1/4
Cell size
5.6 μm
Lens mount
C / CS-Mount
Max frame rate at full resolution 125 fps
Max image bit depth
12 bit
On-board FIFO
32 MByte, up to 99 frames at full resolution, Mono8/Bayer8, and a
GevSCPSPacketSize
= 8192 bytes per packet
Table 3: Manta G-031B/C camera specifications
