Advanced parameters and commands
Goldeye Technical Manual
V2.2.0
65
2
Deactivated
Test mode: Correction data
A
are output as image data. (*)
3
Deactivated
Test mode: Correction data
B
are output as image data. (*)
4
One-point correction: Simple subtraction of the correction data
A
from the input data. In addition the set value
J
is added as
offset to each pixel value.
5
One-point correction: Simple subtraction of the correction data
B
from the input data. In addition the set value
K
is added as
offset to each pixel value.
Note
(*) Test modes 2 and 3 are for test purposes.
If you activate mode 2 or 3, the module does not transmit any
incoming image data. The module outputs correction data as
image data only.
Value
Description
Table 31: Parameter
E
: values
