Data interface
Goldeye Technical Manual
V2.2.0
47
Gain (CC3)
With the camera control signal CC3 the camera gain can be switched. In case
that CC3 is logically 1 the camera works with a gain value of one.
If the CC3 port is logically 0 the gain value is set to 10 (Goldeye xy-008) or 20
(Goldeye xy-032).
IOD mode (CC4)
The camera control signal CC4 switches between the continuous free-running
operation with fixed exposure time of 10 ms /5.4 ms (Goldeye xy-008) or 33.3
ms (Goldeye xy-032) on the one hand and the shutter- and image-on-demand
operation on the other hand.
In case CC4 is logically 0 the image-on-demand mode is set. The camera will
output one image for every exposure impulse it receives via trigger input (CC1
or optocoupler input).
If CC4 is logically 1 the camera operates in continuous mode. As a second input
signal pin 9 of the 15 pin D-SUB jack also controls the IOD mode. If one of these
two inputs selects IOD mode, it overrides the continuous mode selection of the
other one.
GigE feature name
(CameraSpecialFeatures)
Feature visibility Description
HighSpeedMode
Beginner
Turn on or off the high speed mode with reduced
resolution (320x256 @100 Hz / 320x160 @186
Hz)
Table 22: Camera special feature: High speed mode
GigE feature name
(AnalogControls)
Feature visibility Description
Gain
Beginner
This feature controls the selected gain as a raw
integer value.
Table 23: Camera special feature: Gain
