Allied Telesis XS910/8, Manual

Page: 36 / 62

XS910/8 Unmanaged Switch Installation and User’s Guide
36
Installing the Switch in an Equipment Rack
You can install one AT-XS910/8 switch in a row of the equipment rack or
two AT-XS910/8 switches in one row of the equipment rack as shown in
Figure 13.
Figure 13. Rack Installation Options
Guidelines for
Installing the
Switch in a Rack
Before planning to install the switch on an equipment rack, review the
following guidelines:

To install one AT-XS910/8 switch in an equipment rack, use the
AT-RKMT-J14 rack mount kit.

To install two AT-XS910/8 switches in one plate to an equipment
rack, use the AT-RKMT-J15 rack mount kit.
Note
You must purchase the AT-RKMT-J14 or AT-RKMT-J15 rack mount
kit separately.
Installing the
Switch in a Rack
You can either one switch or two switches in a row of an equipment rack:

To install one switch on an equipment rack, see “Installation Using
the AT-RKMT-J14 Rack Mount Kit” on page 47.

To install one switch on an equipment rack, see “Installation Using
the AT-RKMT-J15 Rack Mount Kit” on page 51.