Allied Telesis XS910/8, Manual

Page: 27 / 62

Chapter 2: Installation
27
Note
All Countries: Install product in accordance with local and National
Electrical Codes.

E8
Note
The power input must be provided from SELV source only, per
IEC62368. Do not connect to a centralized DC battery bank.
Warning
An insecurely attached device on a wall may fall and the falling
device may lead to damaging itself or causing injuries.

E96
Warning
Do not install the device on an unstable wall or a wall affected by
vibration or impact. The device may fall and falling device may lead
to damaging itself or causing injuries.

E97
Warning
Do not install the device high on a wall. The device may fall and the
falling device may lead to damaging itself or causing injuries.

E98
Warning
Disconnecting the Device: If the device becomes damaged or you
encounter abnormality with the device, disconnect the power plug
from the AC wall outlet immediately.

E100
Warning
Use appropriate screws to attach the device and brackets to a
19-inch rack. If a device is installed insecurely in a rack, it may fall,
potentially causing injuries or damage to the device.

E104
When you plan to install your switch in an equipment rack, review the
following safety precautions in addition to the above safety precautions.
Warning
Mounting of the equipment in the rack should be such that a
hazardous condition is not created due to uneven mechanical
loading.

E25