Allied Telesis XS910/8, Manual

Page: 31 / 62

Chapter 2: Installation
31
Unpacking the Switch
To unpack the AT-XS910/8 switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the switch on a level, secure surface.
3. Verify that the hardware components are included in your switch
package.
4. If any item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
Table 5. Components in the Bracket Kit
Description Item
AT-XS910/8
switch
AC power cord
Retaining Clip