Allied Telesis XS910/8, Manual

Page: 17 / 62

Chapter 1: Product Description
17
100M/1G/2.5G/5
G/10G Base-T
Twisted Pair
Ports
The AT-XS910/8 switch is equipped with eight 100M/1G/2.5G/5G/10G
BASE-T twisted pair ports
Connector
All twisted pair ports feature 8-pin RJ-45 connectors. For the port pinouts,
see “RJ-45 Twisted Pair Port Connectors” on page 60.
Speed
The ports are 100M/1G/2.5G/5G/10G BASE-T compliant and capable of
100 Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps speeds. The ports are
IEEE 802.3u Auto-Negotiation compliant. With Auto-Negotiation, the
switch automatically matches the highest possible common speed
between the switch port and its end-node.
Duplex Mode
The twisted pair ports on the switch operate in the full-duplex mode.
Auto MDI/MDI-X
All of the twisted pair ports on the switch feature auto-MDI to automatically
configure themselves as MDI or MDI-X when connected to an end-node.
Consequently, you can use a straight-through twisted pair cable to
connect any network device to a port.
Power Connector
The switch has a single AC power supply socket on the back panel as
shown in Figure 2 on page 12. To power ON or OFF the switch, connect or
disconnect the power cord.