Allied Telesis TQ5403, Installation Manual, Page: 51 / 82

TQ5403 and TQm5403 Wireless Access Points Installation Guide
51
2. To connect the wireless access point to your network with both
Ethernet LAN ports, connect a second Ethernet cable to LAN2 port
with these steps.
a. Remove the dust plug on the LAN2 port. Refer to Figure 18.
Figure 18. Removing the Dust Plug from the LAN2 Port
b. Connect the second Ethernet cable into the LAN2 port. Refer to
Figure 19.
Figure 19. Connecting the Ethernet Cable to the LAN2 Port
3. Connect the opposite ends of the Ethernet cables to a network
Ethernet device, such as an Ethernet switch or router.
4. Do one of the following:
a. If the access point is to be power only by PoE+, without an AC/DC
power adapter, go to “Attaching the Access Point to the Mounting
Bracket” on page 53.
b. To connect an external AC/DC power adapter, go to ”Connecting
the AC/DC Power Adapter”.