Allied Telesis TQ5403, Installation Manual, Page: 39 / 82

TQ5403 and TQm5403 Wireless Access Points Installation Guide
39
Reviewing Installation Guidelines
Review the following guidelines before installing the access point:
 The ceiling or wall mounting surface must be of proper material to
accommodate the screws and strong enough to support the weight
of the access point and cables. (Refer to Table 3 on page 57 for
the product weight.)
 Connect the Ethernet cable(s) and power cord to the access point
before installing the product on the ceiling or wall. Depending on
the installation location, connecting or removing cables may be
difficult after the device is installed.
 Verify that the Ethernet cable(s) is long enough to connect to its
destination port(s) before installing the access point. Once the
installation is complete, it is physically difficult to change the
cables.
 If the wireless access point will be powered by an AC/DC adapter,
verify that an AC power outlet is within six feet of the planned
installation site. (Refer to “Power Specifications” on page 58 for the
AC/DC adapter specifications.)
 Refer to Figure 7 on page 40 for approved orientations of the
wireless access point on a table, wall, or ceiling.