Extricom Series WLAN System Installation and User Guide
55
Configuring Radios Manually
To configure each radio manually, click on the
Radios
tab to access the Radios configuration
screen.
The radio settings configured on the
Radios
tab apply to all access points connected to the switch.
That is, each radio can be configured differently in the
Radios
tab on a switch; however, these radio
settings will be the same on each access point connected to the switch.
When the Radios page is initially displayed, it appears in its abridged form. To see all of the
configuration options, click on the “More Options” button. The window shown in Figure 32 below
appears.
When configuring 802.11a/b/g radios, the 802.11n displayed parameters cannot be
configured and are grayed out.
Figure 32: Radios Configuration Page
The configuration parameters of each radio are arranged in a column. There are up to four columns,
each of which is clearly identified with the
corresponding title, for example,
Radio 1
,
Radio 2
.
Refer to Table 11 below to set up the configuration parameters.