10
Introduction to the Extricom Series Wireless LAN System
Figure 5: AT-EXMS-500
The AT-EXMS-500 is equipped with 2 RJ45/SFP GBE Combo port uplinks and 8 GBE PoE edge-
side ports. The AT-EXMS-500 is capable of performing different wireless and networking
functions, depending on the firmware installed in it.
Configuring a switch and its associated set of APs is as simple as configuring a single traditional
AP, greatly reducing the effort required to deploy and maintain the WLAN. Configuration is done
via a dedicated, secured web interface that comes standard with every switch.
SFP modules are not shipped with the AT-EXMS-500/1000. To use the SFP ports,
you must use Class 1 laser certified SFP modules according to IEC/EN 60825-1
and /or CDRH.
