Allied Telesis DNC10 Series, Installation And User Manual

Page: 99 / 118

DNC10 Series Network Interface Cards Installation and User’s Guide
99
Wake from Power Off State
When enabled this feature directs the NIC to wake the computer from
sleep/power off for Wake on LAN support.
To enable or disable the Wake from Power Off State feature, do the
following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 58.
2. Select Wake from Power Off State in the Property box.
The Wake from Power Off State page is displayed as shown in
Figure 50.
Figure 50. Wake from Power Off State Page
3. Select one of the following options:

Enabled — Wakes the computer from sleep/power off
for Wake on LAN support. This is the default setting.

Disabled — The feature is disabled.
4. Click OK .