Allied Telesis DNC10 Series, Installation And User Manual

Page: 63 / 118

DNC10 Series Network Interface Cards Installation and User’s Guide
63
Flow Control
The Flow Control feature allows you to control the flow between the
DNC10 adapter port and its link partner. You can enable or disable the
adapter port to process received PAUSE frames and transmit PAUSE
frames.
To specify or change the Flow Control feature, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 58.
2. Select Flow Control in the Property box.
The Flow Control page is displayed as shown in Figure 26.
Figure 26. Flow Control Page
3. Select one of the following options if available:

Disabled — The adapter ignores PAUSE frames.

Tx & Rx Enabled — The adapter processes PAUSE
frames when receiving and transmits PAUSE frames.

Rx Enabled — The adapter processes PAUSE frames
when receiving, but does not transmit PAUSE frame.

Tx Enabled — The adapter transmits PAUSE frames,
but ignores PAUSE frames when receiving.