Allied Telesis DNC10 Series, Installation And User Manual

Page: 21 / 118

DNC10 Series Network Interface Cards Installation and User’s Guide
21
DNC10SP SFP+ Port
The DNC10SP adapter has an SFP+ port where you can plug in an SFP+
transceiver to connect the adapter to a compatible link partner. The
DNC10SP will detect whether a 10G SFP+ or 1G SFP has been inserted
and will only operate at that speed. It has one LED to show the networking
state.
You cannot change the speed or duplex mode of the transceiver port. The
maximum operating distance of an SFP+ port will vary depending on the
SFP+ transceiver and type of fiber optic cabling.
The port supports the following types of transceivers:
Note
See the Allied Telesis website for supported SFP models.

1Gbps SPSX and SPLX short and long distance SFP transceivers
using multi-mode or single mode fiber optic cable.

10Gbps SP10SR and SP10LR SFP+ short and long distance
SFP+ transceivers using multi-mode or single mode fiber optic
cable.

10Gbps SP10BD series of bidirectional transceivers for single
mode fiber optic cable with maximum operating distances of 10 to
40 kilometers.

10Gbps SP10TW series of direct connect twinax cables with SFP+
transceiver-style connectors, in lengths of 1, 3, and 7 meters.

10Gbps SP10T transceiver with RJ-45 connector for links up to
20 meters (depending on SFP) with Category 6a twisted pair cable,
or 100 meters at 1Gbps.
Guidelines for the port are listed here:

It does not support 100Mbps-FX transceivers.

It supports full-duplex mode only.

The adapter can set the speed automatically with Auto-
Negotiation. The default is Auto-Negotiation.