Allied Telesis DNC10 Series, Installation And User Manual

Page: 78 / 118

Chapter 4: Modifying Advanced Properties
78
Log Link State Event
This feature allows you to enable or disable logging of the adapter's link
state changes (such as changes to the port link state or duplex mode
mismatch) in the system logs.
To enable or disable the Log Link State Event feature, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 58.
2. Select Log Link State Event in the Property box.
The Log Link State Event page is displayed as shown in Figure 36.
Figure 36. Log Link State Event Page
3. Select one of the following options:

Disabled — This feature is disabled.

Enabled — The adapter generates link state events.
This is the default setting.
4. Click OK .