9
Chapter 2
Chassis Installation
This chapter describes the procedures to install a chassis in a rack or on a
desktop, and the procedures to install modules in the chassis.
Prerequisites to Install
You can install a variety of ATI products in the chassis; each one may have
specific features. Before proceeding, make sure you are familiar with:
❑
Your network’s configuration plan
❑
Cabling requirements of the modules you are installing
❑
Front panel indicators of the module’s normal operation
❑
A module’s error conditions and ways to respond to these conditions
Installation Sequence
Perform the installation procedures in the following sequence:
1. Voltage reconfiguration, if applicable, on page 10
2. Chassis installation (choose one that applies):
❑
Rack installation for rackmount chassis on page 12
❑
Horizontal mount installation for desktop chassis on page 12
❑
Vertical mount installation for desktop chassis (4-slot only) on page 12
3. Module installation beginning on page 13
4. Switch installation for a 7-slot segmented backplane configuration,
5. External switch installation beginning on page 17
