Preface
xvi
The Chassis Products
This manual describes the TurboStack chassis with power. Chassis products
are available in the following size options:
❑
The standard four- and eight-slot chassis with standard backplanes
allow you to stack up to four and eight TurboStack hubs, respectively.
❑
The seven-slot chassis with segmented backplanes allow you to stack
up to six TurboStack hubs and either one AT-TS90TR or one
AT-TS95TR switch module. Whether you install the AT-TS90TR or
the AT-TS95TR, each switch module occupies two times the chassis
space of a TurboStack hub.
❑
The four- and eight-slot chassis with segmented backplanes are
designed to hold all TurboStack hubs and can be used with an external
switch (such as the AT-TS90TR, AT-TS95TR, AT-4016TR, or the
AT-4016F/XX).
Chassis models from ATI are shipped with factory-installed labels that say
“Standard” or “Segmented” on the upper right corner of the front of the
chassis.
For a complete list of chassis options available from ATI, contact your ATI
sales representative. A summary of these chassis options is given in Table 1.
Note
If customers choose to install segmented backplanes on their existing
chassis models, each new replacement backplane will be shipped with a
self-adhesive “segmented” label. Customers attach this label on the upper
right corner of the front of the chassis to identify the configuration.
Table 1: Chassis Options
Chassis
Desktop
Rackmount
Standard Non-segmented
(Use with hubs)
4-slot
8-slot
4-slot
8-slot
Segmented
(Use with hubs and one switch
installed in the chassis)
7-slot
7-slot
Segmented
(Use with hubs and an external switch)
4-slot
8-slot
4-slot
8-slot
