AT-S41 User’s Guide
61
Configuring Port Security
To set a port’s security level, perform the following procedure:
1. From the Main Menu, type
A
to select Advanced Switch
Configuration.
2. From the Advanced Switch Configuration Menu, type
P
to select Port
Security Configuration.
The Port Security Configuration Menu is displayed in Figure 16.
Figure 16
Port Security Configuration Menu
3. Type
I
to choose Select Stack ID and enter the ID number of the switch
in the stack where you want to configure port security. (You can skip
this step to configure port security on the master switch, since the
master switch is selected by default.)
4. Type
S
to select Set Secure Level.
5. At the prompt, enter the port number whose security you want to set.
Press Enter.
The following prompt is displayed:
Limited or Secure port N <L/S/N>>
L for Limited; S for Secure; N for Normal
AT-8326GB Local Management System
Advanced Switch Configuration -> Port Security Configuration Menu
Stack ID: 1
Port Secure Level Threshold Intrusion Detection Status
---- -------------- ------------ -------------------------------
1 Normal ----- -----
2 Normal ----- -----
3 Normal ----- -----
4 Normal ----- -----
5 Normal ----- -----
6 Normal ----- -----
7 Normal ----- -----
8 Normal ----- -----
9 Normal ----- -----
10 Normal ----- -----
11 Normal ----- -----
12 Normal ----- -----
---------------------------- <COMMAND> ------------------------------
[N]ext Page [S]et Secure Level Set [T]hreshold
[P]revious Page Select Stack [I]D Set Intrusion[D]etection
[Q]uit to previous menu
Command> _
Enter the character in square brackets to select option
