AT-S41 User’s Guide
184
Configuring Port Security
To configure the switch’s port security, perform the following procedure:
1. Click on the Advanced Config menu tab and select Port Security from
the sub-menu. Choose Security Config from the next sub-menu.
The Port Security page will appear, as displayed in Figure 61.
Figure 61
Port Security Page
2. Select the Stack ID for the switch whose port security you want to
configure from the Stack ID pull-down menu. Then select the port on
that switch whose security you would like to configure from the Port
pull-down menu.
3. Then select a security mode for the port by checking one of the radio
buttons below the Security Mode options: Normal, Limit, or Secure.
For a description of these security levels, see the
Port Security
Overview
on page 59.
Note
The default Security Mode is Normal.
