AT-S41 User’s Guide
128
Configuring QoS
To configure QoS on the switch, perform the following procedure:
1. From the Main Menu, type
A
to select Advanced Switch
Configuration.
2. From the Advanced Switch Configuration Menu, type
S
to select
Quality of Service Configuration
.
The Quality of Service Configuration Menu is displayed in Figure
33.
Figure 33
Quality of Service Configuration Menu
3. From the Quality of Service Configuration Menu, type
S
to select Set
Status.
The following prompt is displayed.
Enable or Disable QoS (E/D) >
E for Enable; D for Disable
4. Type
E
to select Enable QoS or
D
to disable QoS. The default setting is
Disable.
5. If you activated QoS and want to change the queue assignments, type
P
to select Set Priority Queue.
The following prompt is displayed.
Enter Traffic Class
Traffic class is in range of 0 to 7
AT-8326GB Local Management System
Advanced Switch Configuration -> Quality of Service Configuration
Menu
QoS Status : Disabled
Traffic Class Queue
------------- -------------
0 1
1 1
2 1
3 1
4 0
5 0
6 0 0 : Highest
7 0 1 : Lowest
---------------------------- <COMMAND> ----------------------------
-
Set [S]tatus
Set [P]riority Queue
[Q]uit to previous menu
Command> _
Enter the character in square brackets to select option
