Allied Telesis AT-GS950/16PS, User Manual

Page: 239 / 386

AT-GS950/16PS Switch Web Interface User’s Guide
239
3. Enter a number in the Policy Index field.
The Policy Index is a unique number within the range of 1 - 65535
which identifies the policy. This field is mandatory.
4. Enter data in the remaining parameters. All parameters listed below
must be entered to form the policy:
Classifier Index - Classifier table The Classifier Index is a unique
number within the range of 1 - 65535. This field is mandatory. It
must match one of the Classifier Indexes that you have previously
defined. All defined Classifier Indexes appear in the Classifier table
at the bottom of the Create Classifier page. See Figure 77 on page
221 for an example of the Classifier table .
Policy Sequence - The Policy Sequence field is a unique number
within the range of 1 - 64. This field is mandatory. It identifies the
ranking of the specific policy and defines when it will be executed
relative to the other policies . A policy with a Policy Sequence
number 1 will be executed first, number 2 will be executed second,
etc. until the highest Policy Sequence number is reached which will
be executed last. For the status of the order of the policies applied
to specific ports, see “Policy Sequence Status” on page 243.
In-Profile Action Index - The In-Profile Action Index is a unique
number within the range of 1 - 65535. This field is mandatory and
must match an In-Profile Action Index that has been previously
defined on the Create In-Profile Action page. See the In-Profile
Action table described in “Creating an In-Profile Action” on
page 227 for more information.
Out-Profile Action Index - The Out-Profile Action Index is a
unique number within the range of 1 - 65535. This field is
mandatory and must match an Out-Profile Action Index that has
been previously defined on the Out-Profile Action page. See the
Out-Profile Action table in “Creating a Out-Profile Action” on
page 231 for more information.
Port List Index - The Port List Index is a unique number within the
range of 1 - 65535. This field is mandatory and must match a Port
List Index that has been previously entered on the Create Port List
page. See the Port List table “Create Port List” on page 235 for
more information.
5. Click Add .
The Policy entry is added to the status table. If you do not see your
new entry, you may need to navigate to another page of the table with
the
First Page , Previous Page , Next Page , and Last Page buttons
located below the table. An example of a Policy table entry is displayed
in Figure 92 on page 240.