Allied Telesis AT-8000S Series, Cli Reference Manual

Page: 178 / 304

Page 176
Allied Telesyn AT-8000S Switch
CLI Reference Guide
Parameters
•
text — Specifies a string that describes system location information. (Range: 0-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following example defines the device location as New_York .
snmp-server set
The snmp-server set Global Configuration mode command defines the SNMP MIB value.
Syntax
snmp-server set variable-name name1 value1 [ name2 value2 … ]
Parameters
•
variable-name — MIB variable name.
•
name value — List of name and value pairs. In the case of scalar MIBs, only a single pair of name values. In
the case of an entry in a table, at least one pair of name and value followed by one or more fields.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Although the CLI can set any required configuration, there might be a situation where a SNMP user sets a MIB
variable that does not have an equivalent command. In order to generate configuration files that support those
situations, the
snmp-server set command is used.
This command is case-sensitive.
Examples
The following example configures the scalar MIB sysName with the value ati .
Console(config)# snmp-server location New_York
Console(config)# snmp-server set sysName sysname ati