manualshive.com logo in svg

Allied Telesis AT-8000S Series, Cli Reference Manual, Page: 296 / 304

Share
Download
Allied Telesis AT-8000S Series Cli Reference Manual Download Page 296

Page 294

  

Allied Telesyn AT-8000S Switch 

CLI Reference Guide

dot1x guest-vlan

The 

dot1x guest-vlan

 Interface Configuration mode command defines a guest VLAN. To return to the default 

configuration, use the 

no

 form of this command.

Syntax

dot1x guest-vlan 

no dot1x guest-vlan

Default Configuration

No VLAN is defined as a guest VLAN.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

Use the 

dot1x guest-vlan enable

 Interface Configuration mode command to enable unauthorized users on an 

interface to access the guest VLAN.

If the guest VLAN is defined and enabled, the port automatically joins the guest VLAN when the port is 
unauthorized and leaves it when the port becomes authorized. To be able to join or leave the guest VLAN, the port 
should not be a static member of the guest VLAN.

Example

The following example defines VLAN 2 as a guest VLAN.

EapolReqFramesTx

The number of EAP Request frames (other than Rq/Id frames) that have 
been transmitted by this Authenticator. 

InvalidEapolFramesRx

The number of EAPOL frames that have been received by this 
Authenticator in which the frame type is not recognized.

EapLengthErrorFramesRx

The number of EAPOL frames that have been received by this 
Authenticator in which the Packet Body Length field is invalid.

LastEapolFrameVersion

The protocol version number carried in the most recently received EAPOL 
frame.

LastEapolFrameSource

The source MAC address carried in the most recently received EAPOL 
frame.

Console#

Console# 

configure

Console(config)# 

vlan database

Console(config-vlan)# 

vlan 

2

Console(config-vlan)# 

exit

Console(config)# 

interface vlan

 2

Console(config-if)# 

dot1x guest-vlan

Summary of Contents for AT-8000S Series

















































































































































































































































































































Reviews:

No comments