
Page 96
Allied Telesyn AT-8000S Switch
CLI Reference Guide
Default Configuration
The default host-time-out is 260 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
The timeout should be at least greater than 2*query_imax_response_time of the IGMP router.
Example
The following example configures the host timeout to 300 seconds.
ip igmp snooping mrouter-time-out
The
ip igmp snooping mrouter-time-out
Interface Configuration (VLAN) mode command configures the
mrouter-time-out. The
ip igmp snooping mrouter-time-out
Interface Configuration (VLAN) mode command is
used for setting the aging-out time after multicast device ports are automatically learned. To return to the default
configuration, use the
no
form of this command.
Syntax
ip igmp snooping mrouter-time-out
time-out
no ip igmp snooping mrouter-time-out
Parameters
•
time-out
— Multicast device timeout in seconds (Range: 1 - 2147483647)
Default Configuration
The default value is 300 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the multicast device timeout to 200 seconds.
Console(config)#
interface vlan
2
Console(config-if)#
ip igmp snooping host-time-out
300
Console(config)#
interface vlan
2
Console(config-if)#
ip igmp snooping mrouter-time-out
200
Summary of Contents for AT-8000S Series
