manualshive.com logo in svg

Allied Telesis AT-8000S Series, Cli Reference Manual, Page: 269 / 304

Share
Download
Allied Telesis AT-8000S Series Cli Reference Manual Download Page 269

VLAN Commands

Page 267

Parameters
•

vlan-id

 — Specifies the ID of the internal usage VLAN.

Default Configuration

The software reserves a VLAN as the internal usage VLAN of an interface.

Command Mode 

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

An internal usage VLAN is required when an IP interface is configured on an Ethernet port or port-channel.

This command enables the user to configure the internal usage VLAN of a port. If an internal usage VLAN is not 
configured and the user wants to configure an IP interface, an unused VLAN is selected by the software.

If the software selected a VLAN for internal use and the user wants to use that VLAN as a static or dynamic VLAN, 
the user should do one of the following:

•

Remove the IP interface.

•

Create the VLAN and recreate the IP interface.

•

Use this command to explicitly configure a different VLAN as the internal usage VLAN.

Example

The following example reserves an unused VLAN as the internal usage VLAN of ethernet port 1/e8.

show vlan

The 

show vlan 

Privileged EXEC mode command displays VLAN information.

Syntax

show vlan 

[

id vlan-id 

|

 name vlan-name ]

Parameters
•

vlan-id

 — specifies a VLAN ID

•

vlan-name

 — Specifies a VLAN name string. (Range: 1 - 32 characters)

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Console# 

config

Console(config)# 

interface ethernet

 1/e8

Console(config-if)# 

ip internal-usage-vlan

Summary of Contents for AT-8000S Series

















































































































































































































































































































Reviews:

No comments