Patch 86251-05 For Rapier Switches and AR800 Series Modular Switching Routers
9
Patch 86251-05 for Software Release 2.5.1
C613-10356-00 REV F
Features in 86251-04
Patch file details are listed in Table 2:
Patch 86251-04 includes all issues resolved and enhancements released in
previous patches for Software Release 2.5.1, and the following enhancements:
A fatal error occurred if the IP module was reset after the ADD IP EGP
command was executed. This issue has been resolved.
The ability to log MAC addresses whenever the ARP cache changes has
been added. To enable this, use the command:
ENABLE IP ARP LOG
To disable it, use the command:
DISABLE IP ARP LOG
The logging of MAC addresses is disabled by default. Use the SHOW LOG
command to view the MAC addresses that have been logged when the ARP
cache changes.
A buffer address was incrementing and not returning buffers for reuse
when the command line interface was accessed via the GUI interface. This
issue has been resolved.
During route flapping, peers were sometimes not told about routes to the
same destinations as the flapping routes. This issue has been resolved.
If a port belongs to an enabled STP instance, but the port has been disabled
from STP operation with the DISABLE STP PORT command, the port will
not respond to ARP requests. This patch implements a workaround that
allows disabled STP ports to respond to ARP requests.
The SET SYSTEM NAME command was accepting character strings greater
than the limit of 80 characters. This issue has been resolved.
The VLAN membership count for STP ports was incorrect in the default
configuration. This issue has been resolved.
Table 2: Patch file details for Patch 86251-04.
Base Software Release File
86s-251.rez
Patch Release Date
15-April-2003
Compressed Patch File Name
86251-04.paz
Compressed Patch File Size
240936 bytes
PCR: 02571
Module: IP
Level: 3
PCR: 02577
Module: IPG, LOG
Level: 4
PCR: 03025
Module: GUI
Level: 2
PCR: 03044
Module: BGP
Level: 2
PCR: 03048
Module: STP
Level: 2
PCR: 03089
Module: CORE
Level: 4
PCR: 03094
Module: STP, VLAN
Level: 3
