34
SHOW IP IGMP DEBUG
Patch Release Note
Patch 86251-05 for Software Release 2.5.1
C613-10356-00 REV F
Although the
ifIndex
and
Interface
numbers do not match,
this is the correct port
map
.
You do not need to take any more action if you have the correct port map.
An incorrect port map
If the 86251-04 patch is not installed, or has become corrupt, the output from
the SHOW INTERFACE command will be similar to that in Figure 2 on
page 34.
Figure 2: Example output from the SHOW INTERFACE command
without
86251-04.paz installed
Although the
ifIndex
and
Interface
numbers match,
this port map is incorrect
.
You must restore the correct port map if your Rapier16f
i
shows this output.
How to restore the correct port map
The correct port map is restored with the following steps:
5.
Force an EPROM download to restore the bootrom.
To force an EPROM download, you have to restart the switch. To restart the
switch, use the command:
RESTART REBOOT
When the switch starts up, you will see the messages in Figure 3 on
page 35.
Interfaces sysUpTime: 00:01:22
DynamicLinkTraps.....Disabled
TrapLimit............20
Number of unencrypted PPP/FR links.....0
ifIndex Interface ifAdminStatus ifOperStatus ifLastChange
------------------------------------------------------------------------------
1 port1 Up Down 00:00:00
2 port2 Up Down 00:00:00
3 port3 Up Down 00:00:00
4 port4 Up Down 00:00:00
5 port5 Up Down 00:00:00
6 port6 Up Down 00:00:00
7 port7 Up Down 00:00:00
8 port8 Up Down 00:00:00
9 port9 Up Down 00:00:00
10 port10 Up Down 00:00:00
11 port11 Up Down 00:00:00
12 port12 Up Down 00:00:00
13 port13 Up Down 00:00:00
14 port14 Up Down 00:00:00
15 port15 Up Down 00:00:00
16 port16 Up Down 00:00:00
17 vlan1 Up Down 00:00:00
------------------------------------------------------------------------------
