Drain Hose Models - Connect Drain Hose to Drain
Receptacle
Remove the drain hose from its shipping position on the rear of
the washer by removing the shipping tape.
IMPORTANT: Drain receptacle must be capable of han-
dling a minimum of 1-3/8 inch [35 mm] outside diame-
ter drain hose.
Drain Flow Rate - 100-127 Volt/60 Hertz
Drain Height
Flow Rate
gallons per minute [lit-
ers per minute]
3 ft. [0.9 m]
8.6 [32.7]
5 ft. [1.5 m]
6.8 [25.9]
6 ft. [1.8 m]
6.0 [22.7]
7 ft. [2.1 m]
5.1 [19.5]
8 ft. [2.4 m]
4.0 [15.2]
Drain Flow Rate - 220-240 Volt/50 Hertz
Drain Height
Flow Rate
gallons per minute [lit-
ers per minute]
3 ft. [0.9 m]
7.3 [27.7]
5 ft. [1.5 m]
4.7 [17.8]
6 ft. [1.8 m]
3.5 [13.4]
7 ft. [2.1 m]
1.3 [4.8]
8 ft. [2.4 m]
0 [0]
Drain Flow Rate - 208-240 Volt/60 Hertz
Drain Height
Flow Rate
gallons per minute [lit-
ers per minute]
3 ft. [0.9 m]
9.4 [35.5]
5 ft. [1.5 m]
7.6 [28.8]
6 ft. [1.8 m]
6.6 [25.1]
7 ft. [2.1 m]
5.6 [21.2]
8 ft. [2.4 m]
4.3 [16.4]
Water Connection Requirements
WARNING
To prevent personal injury, avoid contact with inlet
water temperatures higher than 125° Fahrenheit [51°
Celsius] and hot surfaces.
W748
The maximum water inlet temperature for vended models is
125°F [51°C] and the recommended maximum water inlet tem-
perature for on-premises models is 150°F [66°C] (standard mod-
els) or 140°F [60°C] (WRAS approved models) .
Connections should be supplied by a hot and a cold water line of
at least the sizes shown in
of additional machines will require proportionately larger water
lines.
Connections should be supplied by a hot and a cold water line per
national and local codes and in accordance with AS/NZS 3500.I.
Installation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
64
Part No. F8619501ENR11
Summary of Contents for BCA Series
Page 2: ......