Water Supply Information
Specification
Model
Require-
ment
Water inlet connection size, in. 20-100
3/4
Thread pitch, GHT [BSPP]
20-100
3/4 x 11-1/2
[3/4 x 14]
Number of water inlets
20-40
2
60-100
(standard
models)
4
60-100
(WRAS- ap-
proved mod-
els)
2
Recommended pressure, psi
[kPa]
20-100
30-85
[200-570]
Maximum inlet flow capacity
per machine, gal/min at 85 psi
[l/min at 1232 Pa]
20-40
10.5 [40]
60
18.5 [70]
80-100
23.0 [87]
Extra water inlet flow, gal/min
at 85 psi [l/min at 1232 Pa]
20-100
5.2 [20]
Table 27
Water Supply Line Sizing, in.
Number of Machines
Supply Line Size
Main
Hot/Cold
1
3/4
3/4
2
1
3/4
3
1-1/4
1
4
1-1/2
1
Table 28
Suitable air cushions (risers) should be installed in supply lines to
prevent “hammering.” Refer to
.
Alliance Laundry Systems, LLC ranges of front loading commer-
cial clothes washing machines have solenoid valves at the inlets.
The water supply to the washing machines is supplied with an
AB air gap between the soap tray and the drum. Minimum and
maximum working pressure 1.4 bar and 8.3 bar. The machines
are supplied with approved inlet hoses with a maximum inlet di-
mension of 1/2 inch (ID).
NOTE: This machine has a fluid category 5 backflow
prevention device built in between the soap tray and
drum.
Installation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
65
Part No. F8619501ENR11
Summary of Contents for BCA Series
Page 2: ......
