Alliance Laundry Systems BCA Series Installation Operation & Maintenance Download Page 100

Page: 100 / 112

OPL Control Instructions

NOTE: The control digit is the 7th digit in the model
number. Example: HCT020 [Q] N0VXU400000

Models with F Control

CHM2561N_SVG

Figure 55

1. If display has gone blank due to sitting idle, press the DIS-

PLAY keypad.

2. Press the SELECT keypad to choose Delicate Cold, Cold,

Warm or Hot. The corresponding LED indicates the selection.

3. Add liquid and/or powder supplies to supply dispenser. Refer

Table 45

a. Detergent:

• Liquid - Compartment 1 (prewash) + Compartment 3
• Powder - Compartment 1 (prewash) + Compartment 2

b. Bleach:

• Liquid - Compartment 3
• Powder - Compartment 2

c. Softener:

• Liquid - Compartment 4

4. Press the START (enter) keypad to select.

NOTE: Cycles can be changed anytime during the
first Fill Step. After the first Fill Step, all cycle key-
pad presses are ignored.

5. When a cycle is complete, the control displays

HCT, SCA, SCD, SCG, SCH, SCJ, SCT, SCU, UCA,

UCD, UCG, UCH, UCJ, UCT and UCU Models with

N Control

Figure 56

1. If equipped with an optional supply dispenser, add dry sup-

plies to the compartment cups prior to the start of each cycle.
Liquid supplies can be injected directly into the supply dis-
penser by an external chemical supply system.

NOTE: Supply dispenser compartment cups must
not be removed when an external chemical injection
supply system is attached to the machine.

2. Press the 1, 2, 3, 4, 5, 6, 7, 8, 9 or 0 keypad to select the de-

sired cycle.

3. Add liquid and/or powder supplies to supply dispenser. Refer

Table 45

a. Detergent:

• Liquid - Compartment 1 (prewash) + Compartment 3
• Powder - Compartment 1 (prewash) + Compartment 2

b. Bleach:

• Liquid - Compartment 3
• Powder - Compartment 2

c. Softener:

• Liquid - Compartment 4

4. Press the START (enter) keypad to select.

NOTE: Cycles cannot be changed anytime after the
machine is started.

5. When a cycle is complete, the control displays

OPEN

DOOR

Operation

DO NOT COPY or TRANSMIT

100

Part No. F8619501ENR11

Summary of Contents for BCA Series

















































































































Search results

Summary of Contents for BCA Series

Reviews:

Related manuals for BCA Series

Brands by name

Popular brands

Alliance Laundry Systems BCA Series, Installation Operation & Maintenance

Search results

Summary of Contents for BCA Series

Reviews:

Related manuals for BCA Series

Brands by name

Popular brands